One of our little Rattle Snakes


The Most Powerful Phase Converters Available

The Bull will get the Job Done.

refrigeration & a/c compressors require a type of converter that can handle the power outages and flickering from the utility company. 

 

Machine shops that use cnc or edm equipment require  a special type of phase converter to match their equipment.   Even if a converter is cnc rated.  that does not mean it will run their equipment.  

ONE THING THAT IS VERY IMPORTANT IS-------------

tHE rotary MOTOR IS THE HEART OF THE PHASE CONVERTER.     ALWAYS USE A TOTALLY ENCLOSED HEAVY DUTY MOTOR.   OPEN TYPE MOTORS suck DUST, DIRT & INSECTS IN,, AND ANT'S LOVE THE HEAT INSIDE A MOTOR.

ALL WOODWORKING AND MACHINE SHOP EQUIPMENT USE TEFC MOTORS.  PHASE CONVERTERS SHOULD BE NO DIFFERENT.   

.

examples are::   a grain bin blower would need a different type of converter then a welding machine would need.

 


We have "surplus phase converters" in stock right now.  call for more information on what we have in stock.  we have 25hp,  40 hp and 50 hp in stock at this time.    you can really save on these. 


Single Phase to 3 Phase Converters        Easiest way to Add A Phase                              

Call  409-336-4841

or 936-585-5914




We have great prices on all models

on-demand compressor converter

only runs when your compressor calls for it.

Single to Three Phase Converter

Simple Hookup and Installation

We Support our Wounded Warriors and All American Soldiers.   We Hope that you do too.  

Phase Converters for Woodworking & Machine Shop Equipment--CNC/EDM Industrial Rated


SOUTHERN PHASE CONVERTERS                              409-336-4841

MANUFACTURING THREE PHASE POWER FOR 38 YEARS             936-585-5914

THE INDUSTRIAL PHASE CONVERTER COMPANY

FOR HEAVY DUTY APPLICATIONS

 

spc

open style Rotary phase converter motor

They are not designed for Industrial Applications.   This is the reason we only manufacture our rotary phase converters with a Heavy Duty Totally Enclosed Cast Iron Motor.  Open Rolled Steel Motors are cheaper to purchase and cheaper to ship,  but in the long run they do not last.   If still in Warranty,  the Manufacturer will say,  YOU should have kept it blown out to prevent it from burning up.

 

Call    409-336-4841

or 936-585-5914

Southern Phase Converters Manufacturer of Rotary Phase Converters and Electric Motors 

One of our Little Baby Catfish,  We released because it was not big enough for a Fish Fry. 

furnish your own 3 phase electric motor & we can build a phase converter panel to turn it into a rotary phase converter.  

 

this saves you money and the results will be the same three phase output as any rotary converter.   call us with the specifications of your 3 phase motor and we can build it to match the equipment you need to run from the converter.    Your three phase motor would have to be either an 1800 rpm motor or a 3600 motor.   actually the 3600 rpm motors will give you more power output for the rated Hp of your motor.  BUT THEY ARE LOUD.

 

10 hp operating with spc compressor converter  130 lbs psi

 

We Design Large Rotary Phase Converters for your location in SOFT-START mode.  This prevents you from dimming the lights in town when you start it.   Some utility companies will not allow you to even start a large converter without Soft-Start.  We can take care of that for you.

we ship nation-wide

 

air compressors & converters

if you only want to operate one piece of equipment and that happens to be an air compressor.    A rotary converter is the best option,  because a static converter will not operate it.  You always lose 1/3 hp using a static converter.   sometimes the cost of the rotary converter to operate the compressor will cost as much or more then the compressor.  

we manufacture an

on-demand converter that will operate the compressor at 90% of the hp rating.   Our converter is incorporated with the controls of your compressor and will usually save you approximately 50% of the cost of a rotary converter.

this is very cost efficient.   you are not running a rotary converter,  and you didn't have to purchase a rotary converter.  

 

 give us a call with the specifications of your compressor.   

Click on an item above to go to that page

pHASE CONVERTERS FOR:

wELDERS, pLASMA , MIG, TIG.    CNC EQUIPMENT, BATTERY CHARGERS.


MACHINE SHOPS, WOODWORKING, GRAIN BINS, OIL FIELD PUMPS, LATHES, MILLS, DRILLS AND PUMPS. rotary phase converters 3 phase converter

RUN MULTIPLE PIECES OF EQUIPMENT FROM ONE SOUTHERN PHASE CONVERTER